Ikegami announces new HDTV camera for IBC201528 July 2015
Ikegami has made a new addition to its range of broadcast quality television cameras. The HDL-57 is a compact high definition camera designed for use on remotely controlled pan/tilt heads. The camera will be demonstrated on the Ikegami stand at IBC2015 in Amsterdam this September.
The camera head and controller are housed in a single rectangular unit measuring 90x103x180 mm weighing 1.5kg. The HDL-57 can be operated remotely or via its rear control panel.
Three advanced 2.5 megapixel 2/3 inch CMOS sensors are employed to deliver wide dynamic range and, in principle, no smear. Each sensor incorporates active processing circuitry and delivers a digital output to the camera’s digital signal processor. The sensors are equipped with native progressive and interlace modes. 1080/59.94i, 1080/50i, 720/59.94p, 720/50p and 1080/23.98p are available from the camera head. 1080/23.98p output is available as an option.
Full digital processing is employed within the HDL-57, from imagers to HD-SDI output. Master gain is processed through a high-grade low-noise amplifier with negative feedback. Video noise cancellation circuits deliver images of wide dynamic range even at high gain level. Specified performance parameters include F11 at 2,000 lux sensitivity, 60dB signal-to-noise ratio and 1,000 television lines resolution in 1080i format (700TVL in 720p format).
Among the operating features of the HDL-57 are six-position switchable gain (0 to +30 dB), six electric shutter speeds (1/100 to 1/2,000 second), four-position optical filter (100, 25, 6.2 and 1.6 per cent) and a two-position electronic colour correction filter (3,200 and 5,600K). The optical filter wheel is motorised and can be operated from Ikegami remote control panels such as the RM-50B and OCP-300. Using these filters in combination, the camera can handle a very wide range of lighting conditions. Auto-white-balance mode is available to cover the full range of colour temperatures.
The Ikegami HDL-57 operates on 12V DC power (11 to 16V), consuming 18W or less. It delivers two HD-SDI outputs and has a reference signal input accepting tri-level HD sync.